Lenz Free Transformer - Experiment Number 1

20,077

120 0

Published 2013-04-23

Ideas for free magnetic induction without the typical law of conservation of energy losses, as implied by Faraday. Faraday's definition for magnetic induction is very clear. It says that you need 3 things, a moving magnetic field, the proper angle, and a constant change in the magnetic flux. It doesn't matter where the magnetic field originates from, magnetic induction occurs when you "change" a magnetic field in a coil.

Strangely, in college level electrical engineering books, there are no explanations that would prohibit over-unity/free energy in a transformer. It is implied that Lenz's law must occur in a transformer, with a corresponding loss of energy, agreeing with the law of conservation of energy, however no facts are given to support this statement, and it is to be accepted on faith, rather than science. With permanent magnets being used, it may be possible to guide magnetic flux lines in a direction that assists the induction process, pushing transformer efficiency from 95% efficiency to 105% efficiency or more.

There are working magnet motors. These are real, and they are powered by permanent magnets. Therefore it has been proven that permanent magnets can perform work. With that said, there is no reason we should not be able to use permanent magnets in transformers to aid in the induction process.

I will be building a prototype transformer in the future. It will be very small scale, and not meant to do anything except show a proof of concept. I do not intend on trying to create free energy.

******************************************************************************

Visit the Ritalie.com "Free Energy Webstore" at: www.ritalie.com/store

******************************************************************************

All Comments (14)

@warrenstephens8557 3 years ago

This is a version of Flynn parallel path technology. You are on the right track
@Buzzhumma 2 years ago

Hi Charles . I have this idea that you can use a stationary magnetic feild the same shape that a pulse coil would create but position the magnet or magnets in such a way that it extends the electromagnetic feild further than with out . This shall increase the collapsing inductive kickback spike voltage ! I still beleive this is possible after 40 years
@fidelcatsro6948 6 years ago

so how are you doing now 4 yrs on amigo? made any improvements?
@alexmanzanero 7 years ago

hi, is there some chance you could send me a link to the machines that you say run with magnets and are ou i am very interested in those also I can visualize a system with coils alongside a very long magnetic loop that we can energize and de-energize at will creating more electricity than used to de-magnetize b cause the lenghth of the sides can accomodate many more coils and their respective flux
@Buzzhumma 4 years ago

I have been thinking along the same flux lines for many moons Charles but this was the first demonstration I have seen. Thanks so much for your demo. I have also considered the consept of using a coil to turn off or attenuate or redirect the flux of a permanent magnet. Maybe just after attraction mode has been fulfilled it could trigger a Reed switch to charge a coil that repels 😲
@earlwilson6153 1 year ago

Transformers only work with AC, any dc transformer is just an electromagnet, 1 primary and 2 secondary coils, more copper will let more ether energy in, ether is AC 6 cycles per second
@alexmanzanero 6 years ago

I think i have solved the lenz effect problem and actually its quite simple , we must change the shape of the nucleus of the coil to cancel the lenz, let me know if intewrested
@scotvaka1t375 10 years ago

Nice Video. Good Idea...I had a similar idea! I agree that using a coil to create a magnetic field to cancel or "interrupt" a permanent magnet field would let you be able to use a generator coil(s), in the right place, to be able to extract energy from the permanent magnet. Awesome! I was going to use AC current and try to make the "interrupt" circuit be a RCL or "Tank" circuit. You start the tank circuit with a battery and, once it gets close to resonance, back feed some energy gathered from the generator coil circuit, via induction, to the tank circuit to keep it going. Then, disconnect the starting battery. Some of the energy from the magnet keeps the tank circuit going forever and some of the energy runs a load... theoretically making the device over unity and being able to supply "free" energy. I hope this makes sense. If anyone has questions or comments please let me know. Peace!
@gconol 10 years ago

This reminds me of the Bitt transformer or the Flynn magnet motor concept.
@369Eletricidade 4 years ago

Parabéns por compartilhar seu trabalho, tenho alguns experimentos com a bobina bifilar plana, patente 512340 em meu canal 3 6 9 eletricidade...
@Fanga99 11 years ago

Great idea! check out Joe Flynn on the Rexresearch site for info on research that has been done on this and similar.
@naokikashima9349 10 years ago

Hey thanx for posting this awesome video. I've been experimenting myself but the only difference btw. you and I is that you actually know what you are doing, lol. Turns out that scaler waves are actually 1.5 times faster than the speed of light. Say what? Yep, its been replicated in experiments. We will get to zero fossil fuel, the time is comming.
@hrmofutopia9024 4 years ago

As you are doing R&D in a similar field as I do, you may be interested in a concept, that I am working on, that is inverting the Lenz Drag and make it a Lenz Accelleration: https://www.youtube.com/watch?v=C6E-rYx_LwU