How To Make Pie Cuts | Quick & Easy Method - Stainless Steel Pie Cuts For Exhaust Fabrication
58,828
2021-09-01に共有
www.fabco.uk
:::::::::::::::::::::::::::::::::::::::
PIE CUT CALCULATOR
bit.ly/piecutcalculator
コメント (21)
-
Easy, simple guide! Thanks!
-
Sweet! Just exactly what I was looking for!!!
-
Finally someone explaining it nice and simple thank you sir 👌🏻👌🏻👌🏻
-
Awesome video, easy to follow, I used a finger linisher to clean my inside burr
-
Nice and easy to follow! Nice work!
-
Best vid on this by far
-
I love it
-
I’ve made a few pies but still learnt more of that vid ace
-
Notice how he changed from imperial to metric to achieve better precision.
-
You can use a length of angle iron to mark a straight line down a tube. Just lay the open side of the angle along the tube. It self centres because it sits on the 2 outer edges of the angle. Then align the edge of the angle with your centre line from using the tape.
-
first straight to it.
-
Easier way to get the center line is use a piece of material that puts the sharpie at exactly 1/2 of the width of the pipe and just move all along the pipe.
-
dont you want to keep that first piece, as a transition from straight tube to pie cuts?
-
Anyone know what kind of bandsaw he's using?
-
Very easy work like that, when you have tools. I wanna see, how do that, if you have only angle grinder.
-
Using a square assumes that your end cut is square. Angle iron works better for this.
-
Ok, i have the sharpie and masking tape...now i just need the $10,000 bandsaw :)
-
some would say its as easy as pie. Ill see myself out.
-
Is the icengineworks for sale yet?
-
cały film jak cuąć rure a na konieć ita kchj z tego
