Building My Dream Yacht From Scratch Pt 11 - Installing Furniture!
41,763
Publicado 2024-07-27
Check out metalmyway.com/ contest running Aug 1- Aug 31
And stock up on materials at www.metalsupermarkets.com/
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - facebook.com/bisforbuild
❱ Instagram - instagram.com/bisforbuild
❱ Twitch - www.twitch.tv/bisforbuild
Music:
Fareoh - Cloud Ten
Todos los comentarios (21)
-
Dont forget galvanic corrosion between the steel and alumnimum.
-
Build a nice trash can to put in front of the consol and fill the void
-
I just need to say Kyle is doing a great job.
-
You should sleeve the bolts going through the aluminum tubing so it doesn't collapse the tubing. Also I remembered that from the lotus build you need some type of sealant/adhesive between the steel and aluminum to prevent galvanic corrosion which I can imagine would be 10 times worse on something on the water.
-
"I'm Not An Engineer" needs to be put on a "B is for Build" T-Shirt.
-
I would place a icebox in the empty space in the front. Perfect place to leave your bottle or your drinks cold out in the front. 🎉🎊
-
I think the name should be "Double Decker Pecker Wrecker" 😂😂
-
Cool build. One suggestion from a Mechanical Engineer, make sure you consider galvanic corrosion any where you have dissimilar materials in contact with each other. Look at providing some type of an isolation pad between the steel doubles underneath the aluminum frame where you plan on adding the additional bolts for stabilizing the second story gussetts
-
Storage unit space in front of the helm would be good to hide your trash can. Awesome build and thanks for bringing us along!
-
I recommend gusseting those posts in 3 ways. Strengthen lateral movement
-
Space between the seat and the pilot console is perfect for life preserver storage.
-
With everything off deck, Roll carpet over entire floor, Then install everything over carpet. Same as pontoon,camper/RV manufactures do. No BS cutting.
-
Can I STRONGLY suggest that some padding needs to be fixed around the edges of the hole in the second floor because, without it, you will have a good number of inebriated party-ers ending their nights down in the Emergency Room having stitches sewn into the tops of their heads!¡!!
-
Just a quick one when welding tubes or box section drill a small hole in the tube, it lets the air escape when it expands (heat) and stops blowing out your welds, also use the small holes to squirt wax oil inside to protect the tubs and bars on the weld joints from the inside
-
That black paint is going to give a few nearly-naked revellers some unpleasant burns, but probably not to the point of blisters, fortunately! I kinda wish you'd have gone with a gloss white... You don't see that many black garden furniture for the same reason!!
-
Install capability to hang privacy curtains for on-water camping
-
Where do the hatch/covers go when the hot tub is in use?
-
that miscalculated small space in front of the captain pit/steer can be used for fire extinguisher
-
R is for Regret 😀
-
isnt the bottom of where the metal is bolted to the wood bare metal? any plans to unbolt it and paint the bottom of those baseplates?
