BEGINNER'S GUIDE TO RATCHET STRAPS
1,335,462
Published 2021-03-20
24mm prime lens: amzn.to/3CBnKkN
35mm prime lens: amzn.to/39pIShr
50mm prime lens: amzn.to/39uiOBO
85mm prime lens: amzn.to/2XJDqUq
CFAST cards: amzn.to/3CBry5E
SD cards: amzn.to/2XDTvdI
card reader SD/CFEXPRESS: amzn.to/39qI4sH
card reader SD/CFAST: amzn.to/3hZ1xFv
EDIT SOFTWARE: amzn.to/3hYYSLP
*These are affiliate links which, when you click on them, at no cost to you, will provide the channel with a small commission. Your support, should you choose to give it, is greatly appreciated....
PLEASE LIKE AND SUBSCRIBE: / @readiysteadiy
In this video I go over the basics of how to use ratchet straps - beginners need stress about them no more.... tutorial on how to assemble, tighten and release - and some tips as well....
#readiysteadiy #ratchetstraps #tiedown
CHANNEL STATEMENT: This is a channel about my relationship with stuff. We all need to have a better relationship with the stuff in our lives - we have too much of it, and most of it’s junk. If nothing else I hope you take away with you an interest in the stuff in your life - a curiosity for how it’s made - why it’s good or bad - and perhaps even inspiration to build new stuff or fix what you’ve got. Having said that - the internet is a terrible place to learn anything. Unless you independently verify what you learn - you’ll never know if it was right or wrong or made up completely…. Unfortunately disinformation is both the currency and the bane of our era. I’m no expert in anything you’ll see here. I don’t want you to think that I am. Through my job I have access to people who are - and I’ve learned from them over the last couple of decades and become someone who is curious about stuff, brave about stuff , and foolish enough to try and make a youtube channel about my relationship with stuff all at the same time.
DISCLAIMER / PLEASE READ: In making this channel I will put more effort into making the content accurate, safe and correct than most - but that doesn’t mean I can’t be wrong. Accordingly I can’t guarantee or warranty any specific outcome for viewers should they attempt something similar to what they see on the channel. I encourage you not to copy projects you see here directly but build on them - discuss them with experts in your life, and make them better - make them work safely for you. We all need to figure out a better way to own stuff - this channel is meant to illustrate my experience with that, promote learning, have some fun, and challenge myself. Working with any tool or on any project can lead to unintended results - including injury and damage to property. Don’t work beyond your capability. In the same way I have to take complete responsibility for the outcome of my endeavours as recorded here, and my own safety and the safety of those around me - you have to do the same….. Use the information here at your own risk. Be safe, have fun, proceed with the appropriate caution for your situation….
All Comments (21)
-
You left out the most important step. Once the load is secure you have to slap it and proudly state “that ain’t goin’ nowhere”. :)
-
You have a special place in heaven for making this video. I'm a middle aged man and just now learned it properly. Thank you!!
-
I honestly fo not understand why some peple gave thumbs down. This is the most clear description I came across. Thumbs up all the way!!! Thank you!
-
This might seem random, but I was having trouble threading my new ratchet strap and I got a little upset because that’s something I’d have asked my dad to help with, but he passed about 5 years ago. This was the next best thing. Thanks for the concise and clear demonstration! I watched other videos that didn’t actually help but this got me there before the end of the video.
-
I have been using these for 40 years in trucks with etrac to secure road cases, one thing I have to disagree with is pulling the slack as tight as possible. In my situation if you pull the slack as tight as possible the strap will not spool enough to keep the strap from slipping. the way we avoid this is to yes pull the slack until its tight, but leave a few inch's from the load you are securing. this ensures the strap spools enough times to not slip. this is why sometimes when you travel and go to release the ratchet there is slack and the strap is not holding correctly.
-
Thank you! After 5 tries and a slight concussion this video helped immensely!
-
Thank you so much for these basic and straightforward instructions. I am no longer "ratchet handicapped"
-
I should've watched this video last week when I hauled 50 feet of gutters and their fascia boards. But it was getting late, so I borrowed some straps from a friend and just tossed them in my SUV and went to Home Depot. When I tried to use them they were threaded wrong and I had to rethread them -- and did it wrong too, of course. I had too much slack to secure the load. It was dusk and getting darker fast. It wasn't a very big or heavy load, so I used 'Red-Neck Ingenuity' and duct-taped the gutters and boards together. Then I secured the load with a set of 5 ft long, heavy-duty Bungie straps instead. They did the job well but I was nervous driving the entire 3 miles home. Thanks for showing me how easy the ratchet straps are to use -- properly!
-
The best video and explanation of how to use a ratchet strap. Thank so much.
-
Hi ReadySteady, Just wanted to say "thank you" creating this very clear, simple video about using ratchet straps. Previously, I spent a considerrable amount of time trying to get this mechanism to work poperly - delayed the beginning of our road trip by an hour. However, thanks to your wonderful instrutional video, I'm now a rachet strap ninja. Thank you very much!
-
I recognize the value of ratchet straps and, more importantly, I recognized my inability to thread them correctly and use them properly. This video corrected that. For that, I thank you!
-
Best video I've seen on the subject - showing how the ratcheting mechanism works at the start of the video is a huge help, rather than just blindly following "do this, then this" type tutorials.
-
Sir, We thank you from the bottom of our hearts for the video. You didn't try to play with anyone's intelligence, you simply produced a kind and sensible video. Your video will remain with us for those times and moments that we simply forget. Peace be with you.
-
This is exactly what I needed! Takes the mysyery and frustration out of using ratchet straps. Thank you
-
I watched this video a while ago and Thank Goodness I saved it. I don't use my Ratchet Straps very often but I'm usually hauling a 3 Ton tractor on my trailer. I bought expensive good quality heavy duty straps that would hold my Tractor in place. I bought the straps about three years ago when I bought the Trailer. Luckily for me I found your video on the day I was going to use them for the first time and watched it as I strapped down my Tractor. I'm so glad I found this video. I watched it again today to refresh my memory and realised at least two of the straps are on wrong. I'll go out to my workshop later and re-strap them. THANK YOU for taking the time and trouble to make and post this GREAT VIDEO. I'm still going to save it for future reference. THANK YOU ACAIN.
-
Great video. I been using Ratchet Straps for over thirty years and didn't realize I was releasing the load wrong. Thanks
-
I already know how to use these straps, but your video is PERFECT for anyone that is a-little lost with these things. Thanks for posting. 🇨🇦👍🏼
-
Thank you. Perfect. Very interesting note about the twist. I drove from UK to Morocco (that time i got lucky with fixing the straps) and the vibration amplified through the car shell was literally deafening. I had to do something! I stuffed towels under the load wedged against the roof bars. Now with this tutorial I gave a little load to take across country and I feel happy that I can finally use the ratchet straps competently
-
A flawless explanation of how tie-down ratchets work. Thanks for taking the time to make this incredibly useful tutorial.
-
This is exactly what I needed to watch & learn. BoatBuckle does not show how to thread it, work it, use it. Thanks a million.
