Can I Fix Sega Genesis {Mega Drive} Games (12 Sega Genesis Games Part 2)
1,290
Published 2024-06-27
Affiliate links
Good Magnet/Jumper Wire: amzn.to/3VnYgST
Tweezers: amzn.to/3Rs3hIO
UV Mask: amzn.to/3xgGlWc
Good Gloves: amzn.to/3x6Qi8N
PCB Holder: amzn.to/3XlByxi
My microscope camera: amzn.to/3yYy75N
My Microscope stand: (Discontinued) amzn.to/3XjZNMj
Alternative Microscope stand: amzn.to/3KH3hRt
Phone I use to record: amzn.to/45rdnzO
The Soldering Station I use........
www.amazon.com/Radio-Digital-Soldering-Station-64-…
After the first attempt I looked up tutorials for repairing traces and learned a lot form this YouTube cannel: Branchus Creations
• Repairing broken traces on a circuit ...
Thank You For Watching!
All Comments (19)
-
I won't be bothered to place a wire when the gap itself is less than diameter of that wire. On good half of these cracks you can get away with just a solder blob.
-
for some reason youtube recommend me this video. Great video and new subscriber here
-
The funny thing about magnet wire: If you're using it for patching a trace, then you want what is normally considered bad quality so that the enamel is removed easily. If winding a speaker coil or radio tuner or inductor, etc, you want the BEST quality wire so that the enamel doesn't flake off so easily.
-
The fiberglass pen that I use has a smaller diameter fiberglass element . Possibly the broader size pens like that cover too much area for such a job .
-
huh magnent wire for enamel wire. i learned something. never crossed my mind.
-
Great job on these! If you replace that flux pen with some genuine quality flux (amtech is great) it will make a huge difference :)
-
Good stuff mate, just started the same thing, first video coming up soon. Let me know if you want to chat about it... In the meantime I just got hundreds of cassettes and games...but nothing makes you feel better than a repaired sega cartridge!
-
18:12 with such a solder blob on a contact pin you are going to destroy your cwrtridge slot as it will bend the contact in the slot.
-
subbed. keep it up.
-
Great video ❤❤❤
-
Good job! One more subscriber!
-
That mono made me check my headphones ...
-
@HopefulRepairman what catastrophe caused this damage?
-
what solder are you using
-
I can see the reflections of the LED lights you got going there yet the image is still too dark. fix the exposure setting on your camera.
-
By cheap Sports games and swap the rom chips
-
you need more flux.
-
I have used fiberglass pens many times. I don't know why you are freaking out 🤨
